TERMS & CONDITIONS

DISCLAIMER

Real Estate Blinds | Property management and real estate trade services

Business details

Real Estate Blinds is a registered business name of Real Blinds Australia Pty Ltd (ABN 88 699 381 372).

In these Terms & Conditions, references to “Real Estate Blinds”, “REB”, “we”, “us” or “our” mean Real Blinds Australia Pty Ltd (ABN 88 699 381 372), trading as Real Estate Blinds.

These Terms & Conditions apply to goods and services supplied under the Real Estate Blinds business name and should be read together with the applicable quotation, work order and any other written terms agreed for the relevant job.

1. Acceptance and authority

A quote is accepted when the client, property manager or authorised representative approves it in writing, issues a work order, pays a requested deposit or instructs us to proceed.

The person approving the work confirms that they have authority to engage Real Estate Blinds and approve the quoted work on behalf of the property owner, agency or other responsible party.

2. Warranty

Real Estate Blinds provides the following warranty periods from the date of installation:

  • Roller blinds and installation workmanship — 10 years
  • Curtains and shutters — 5 years
  • Motors, motorised components, Venetian blinds, vertical blinds and Roman blinds — 3 years

These warranties cover defects in materials, manufacture or installation workmanship under normal use.

They do not cover normal wear and tear, misuse, accidental damage, unauthorised alterations, improper cleaning, failure to follow care instructions, or deterioration or damage caused by environmental or site conditions.


If a valid warranty claim is accepted, we may repair, replace or rectify the affected product, component or installation, as appropriate.


Nothing in these Terms excludes, restricts or modifies any guarantee, right or remedy that cannot lawfully be excluded, including under the Australian Consumer Law.

3. Installation

Real Estate Blinds will exercise reasonable care and skill when installing its products.

Installation may require drilling or fixing into timber, aluminium, plasterboard, masonry, tiles or similar materials. Minor cosmetic marking or cracking may occur where reasonably necessary to carry out the installation.

We are not responsible for damage arising from concealed wiring, plumbing, gas lines, steel reinforcement or defects within the existing structure that could not reasonably have been detected before installation.

Where fixing into aluminium window or door frames is required, permanent penetrations may be created. These may affect or void an existing manufacturer’s warranty depending on that warranty’s terms. The client is responsible for confirming any impact on existing third-party warranties.

By accepting the quotation, the client authorises the fixing methods reasonably required to complete the quoted installation.

4. Quote and scope

The quote covers only the products, quantities, locations and services expressly listed.

Unless otherwise stated in the quote, it excludes electrical work, painting, patching, building repairs, moving furniture, difficult-access equipment, parking costs and work outside the agreed scope.

Quotes are based on the information supplied to us and the site conditions reasonably visible or known when the quote is prepared.

Changes to the scope, specifications, sizes, quantities, finishes, locations or site conditions may affect the price and completion timeframe.

5. Payment terms

Invoices dated from the 1st to the 19th of a month are due by the last day of that month.

Invoices dated on or after the 20th are due by the last day of the following month.

For jobs over $2,000, Real Estate Blinds may require a deposit before ordering products, commencing manufacturing or commencing work. Any required deposit will be stated or confirmed before work proceeds.

6. Site access and readiness

The client must arrange safe and timely access to the property, including working keys, access instructions and any required approvals.

Tenants, occupants, pets, furniture and personal belongings must not obstruct the work.

If access is unavailable, the site is unsafe or the work area is not reasonably ready, we may stop or reschedule the visit.

RETURN VISIT: $132 PER SITE VISIT, EXCLUDING THE FREE INITIAL SITE MEASURE.

7. Site conditions and concealed risks

Installation depends on suitable walls, ceilings, frames and fixing surfaces.

We are not responsible for pre-existing defects or concealed conditions that could not reasonably have been identified before work, including weak or crumbling plaster, uneven surfaces, concealed pipes or wiring, asbestos, water damage, rot, pests or inadequate structural support.

If such a condition is discovered, we may make the area safe and pause the work until an appropriate solution and any required variation are approved.

8. Variations

Changes requested after acceptance, unexpected site conditions or work outside the quoted scope may affect price and timing.

We will seek approval for a variation before carrying out additional chargeable work, except for minor action reasonably required to prevent immediate damage or make the site safe.

Variations should be agreed in writing wherever reasonably practicable.

9. Existing coverings: removal and disposal

Removal and disposal of existing blinds, curtains, tracks or fittings is a free inclusion limited to the areas where new products supplied by Real Estate Blinds are to be installed, unless otherwise stated in the quote.

We may refuse to remove, carry or dispose of items that are excessively heavy or oversized, unsafe, contaminated, mould-affected, pest-affected or otherwise unsuitable for normal handling.

Removal may reveal holes, fading, damaged paint, weak surfaces or other pre-existing conditions.

Patching, painting and making good are excluded unless expressly included in the quote.

10. Custom-made products and cancellations

Made-to-measure products are manufactured specifically for the relevant property.

Once ordering or manufacturing has commenced, changes or cancellation may not be possible and the client may be responsible for costs already reasonably incurred or committed.

Nothing in this clause limits any right or remedy available under the Australian Consumer Law.

11. Timing and delays

Manufacturing, delivery and installation dates are estimates unless expressly agreed otherwise in writing.

We will use reasonable care to meet estimated timeframes but are not responsible for reasonable delays caused by supplier or freight disruption, product availability, unsafe site conditions, denied access, weather, regulatory requirements or other events outside our reasonable control.

Where practicable, we will notify the client of significant delays and reschedule within a reasonable time.

12. Product appearance, operation and care

Samples are indicative only. Reasonable variations in colour, grain, texture, fabric alignment or manufacturing batch may occur.

Window coverings may also exhibit normal characteristics such as side gaps, light seepage, fabric movement, settling or minor dimensional variation.

Performance depends on the selected product, window, installation position and site conditions. Complete darkness, insulation, privacy or exact colour matching is not promised unless expressly included in the quote.

Products must be operated and maintained in accordance with applicable care instructions.

Warranty does not cover normal wear and tear, misuse, accidental damage, unauthorised alteration, improper cleaning, failure to follow care instructions, or deterioration caused by sunlight, moisture, mould, salt, pests or other environmental conditions, subject always to applicable law.

13. Child safety

Corded internal window coverings will be installed with required child-safety devices.

Those devices must remain fitted and must not be removed, loosened, altered or bypassed.

After installation, the owner, agent and occupants are responsible for reporting damaged or missing safety devices and preventing interference with them.

14. Inspection, defects and warranty claims

The owner, agent or authorised representative should inspect completed work and notify us promptly of any apparent issue or defect.

Where possible, apparent installation or product issues should be reported in writing within 7 days of completion so they can be investigated promptly.

Failure to report an issue within 7 days does not remove any warranty or statutory rights that otherwise apply.

For warranty claims, the client must provide reasonable details of the issue and allow reasonable access for inspection and rectification.

If a valid warranty claim is accepted, Real Estate Blinds may repair, replace or rectify the affected product, component or workmanship as appropriate.

15. Limitation of liability

Nothing in these Terms excludes, restricts or modifies any guarantee, right or remedy that cannot lawfully be excluded, including under the Australian Consumer Law.

To the extent permitted by law, Real Estate Blinds is not liable for indirect or consequential loss, loss of rent, loss of profit, loss of opportunity, or loss arising from pre-existing defects, concealed conditions, inaccurate client-supplied information, misuse, lack of maintenance or work or alterations performed by others.

Where liability may lawfully be limited, our aggregate liability arising from the relevant job is limited to the amount paid or payable for that job, or the reasonable cost of supplying the affected goods or services again, whichever limitation is permitted and appropriate under applicable law.

16. General and order of precedence

If any provision of these Terms is invalid or unenforceable, the remaining provisions continue to apply.

These Terms are governed by the laws of New South Wales, Australia.

The specific quote, the Terms & Conditions supplied with that quote, and these website Terms & Conditions together form the agreement for the relevant work.

If there is an inconsistency, the following order of precedence applies:

The specific written quote and any expressly agreed job-specific variations;

The Terms & Conditions supplied with the quote; and

These website Terms & Conditions as published at the time the quote is accepted.

The applicable website Terms & Conditions are those in effect when the relevant quote is accepted. Any later update to these website Terms & Conditions will not retrospectively alter the terms of an already accepted quote.